DLP Ring Bolt Lift Point Long M20 Long Bolt (198mm)
Z1022200Lper Each
$386.71 inc GSTTrade $348.04, save $38.67Trade accounts save 10%. Apply with your ABN
| Variant | M20 Long Bolt (198mm) |
About this product
The DLP Ring Bolt Lift Point Long M20 Long Bolt (198mm) is a bolt-on lifting point for fittings where the thread has to reach deep into the load. The extra bolt length is what sets this one apart from the shorter M20 option, so it suits thick plate, spacer arrangements and recessed tapped holes. The housing stays compact, which helps when the point sits in a corner or hard against an edge.
The oblong link folds flat over the housing when the point is idle, keeping it out of the way and clear of knocks. Up to M24 the link also has a stay-up function, so you can get a hook on it fast in tight spots. The hexagon bolt is RFID prepared and comes off with a wrench. Working load limit, mounting torque and manufacturer ID are marked on the bolt itself, so the rigger can check them on the spot.
Common questions
- what is the bolt length on the DLP M20 lift point
- This variant has a 198mm long bolt on an M20 thread. It is the long bolt option, meant for deeper tapped holes and thicker sections.
- where do I find the WLL on a DLP ring bolt
- The working load limit is marked on the bolt itself, along with the mounting torque and manufacturer ID, so the operator can read it before rigging.
- can the DLP lift point be used in tight corners
- Yes. The housing has a compact design for narrow spaces such as corners and edge positions, and the link folds over the housing when the point is not in use.
Questions about this equipment? Send us a message and we’ll check it against the job.