DLP Ring Bolt Lift Point Long M16 Long Bolt (158mm)
Z1022160Lper Each
$237.70 inc GSTTrade $213.93, save $23.77Trade accounts save 10%. Apply with your ABN
| Variant | M16 Long Bolt (158mm) |
About this product
The DLP Ring Bolt Lift Point Long M16 Long Bolt (158mm) is a bolt-on lifting point for loads where the thread has to reach deep. At 158mm, this bolt suits thicker plate, spacers or recessed bosses that a standard-length M16 bolt cannot pull up tight. The housing is compact, so it works in corners and hard against an edge where a bigger lift point would foul.
The oblong link folds flat over the housing when it is not being used, so the point sits almost flush and stays out of the way during handling. It also has a stay up function for on-hooking in tight spots, which keeps the hook off the load and speeds up rigging. The hexagon bolt comes off with a wrench, is RFID prepared, and carries the working load limit, mounting torque and manufacturer ID marked on it.
Common questions
- what is the difference between the DLP long bolt and the standard DLP
- The long version gives you more thread to work with. This M16 variant has a 158mm bolt, which suits thick material or recessed mounting where a standard bolt will not reach.
- does the DLP lift point fold down when not in use
- Yes. The link folds over the housing when idle, so the lifting point stows away almost completely and sits out of the way.
- where do I find the WLL and torque for this M16 lift point
- Both are marked on the hexagon bolt itself, along with the manufacturer ID, so the operator can read them on the job.
Questions about this equipment? Send us a message and we’ll check it against the job.