DLP Ring Bolt Lift Point M16
Z102216per Each
$161.33 inc GSTTrade $145.20, save $16.13Trade accounts save 10%. Apply with your ABN
| Variant | M16 |
About this product
The DLP Ring Bolt Lift Point M16 is a bolt-on lifting point for tapped loads where the hook has to come in close to a corner or an edge. The M16 thread suits smaller fixtures and lighter attachment points, and the compact housing means it sits tight against the load instead of hanging out where it can get knocked about. The closed, oblong link folds flat over the housing when the point is idle, so it can be left fitted and stowed away between lifts.
At M16 the link also has the stay-up function, which holds it upright for on-hooking in cramped spots. That saves fumbling and keeps the hook off the workpiece. The hexagon bolt comes off with a wrench for assembly or inspection, and it is RFID prepared. Working load limit, mounting torque and manufacturer ID are marked on the bolt itself, so the rigger can check what is in front of them.
Common questions
- what is the WLL of the DLP ring bolt lift point M16
- The working load limit is marked directly on the hexagon bolt, along with the mounting torque and manufacturer ID, so check the marking on the unit in front of you.
- can you leave a DLP lift point fitted to the load
- Yes. The oblong link folds over the housing when not in use, so the point sits almost flush and can stay bolted in place between lifts.
- what makes the DLP better than a standard eyebolt in tight spaces
- The housing is compact so it works in corners and edge positions, and the stay-up link holds the oblong link upright for easy on-hooking where there is little room.
Questions about this equipment? Send us a message and we’ll check it against the job.