DLP Ring Bolt Lift Point M12
Z102212per Each
$156.53 inc GSTTrade $140.88, save $15.65Trade accounts save 10%. Apply with your ABN
| Variant | M12 |
About this product
The DLP Ring Bolt Lift Point M12 is a bolt-on lifting point for fixtures, dies and fabricated loads where the attachment sits close to a corner or an edge. The housing is kept compact, so it fits in narrow spots that a bigger lift point will not clear. When the job is done the oblong link folds over the housing and sits almost flush, which keeps it out of the way during handling and storage.
The closed oblong link has a stay-up function, standard on sizes up to M24, so it holds position for on-hooking when you have no room to work a hand in. That means less chance of the hook knocking the load about, and faster rigging. Fitting and removal is done with a wrench on the hexagon bolt, which is RFID prepared. The bolt carries the working load limit, mounting torque and manufacturer ID, so the operator can read it off at the point of use.
Common questions
- what size thread is the DLP M12 ring bolt lift point
- This variant has an M12 thread. It is one of nine sizes in the DLP Ring Bolt Lift Point range.
- where do I find the WLL on a DLP lift point
- The working load limit is marked on the hexagon bolt, along with the mounting torque and manufacturer ID, so it stays visible to the operator.
- is the DLP lift point any good in tight corners
- Yes, the compact housing is designed for narrow spaces such as corners and edge positions, and the link folds over the housing when not in use.
Questions about this equipment? Send us a message and we’ll check it against the job.