DLP Ring Bolt Lift Point Long M8 Long Bolt (97.5mm)
Z1022080Lper Each
$154.14 inc GSTTrade $138.73, save $15.41Trade accounts save 10%. Apply with your ABN
| Variant | M8 Long Bolt (97.5mm) |
About this product
The DLP Ring Bolt Lift Point Long in M8 with a 97.5mm bolt is a bolt-on lifting point for loads where the tapped hole sits deep or the mounting section is thick. The extra bolt length is what separates this size from the shorter options in the range, giving you thread engagement well below the surface while the housing stays flat against the load.
The housing has a compact footprint, so it suits corners and edge positions where a standard eyebolt will not fit. The oblong link folds over the housing when idle and sits almost flush, and it has a stay-up function for easy on-hooking in tight spots. Fitting and removal is done with a wrench on the hexagon bolt, which is RFID prepared and marked with the working load limit, mounting torque and manufacturer ID so the operator can check it on the job.
Common questions
- what thread size is the DLP ring bolt lift point long M8
- It takes an M8 thread, with a long bolt measuring 97.5mm. That length suits deeper tapped holes and thicker mounting sections.
- where do I find the working load limit on a DLP lift point
- The working load limit is marked on the bolt itself, along with the mounting torque and manufacturer ID, so the rated figures stay with the fitting.
- is the DLP lift point better than a standard eyebolt in tight spaces
- Yes, the housing is compact and the link folds over it when not in use, so it works in corners and edge positions where a standard eyebolt would foul.
Questions about this equipment? Send us a message and we’ll check it against the job.