
| LC | 2500kg |
| UOM | Each |
| Width | 50mm |
| Length | 12m |
| Weight | 3.4kg |
| Hook Type | Hook & Keeper |
| Description | 50mm x 12m c/w Hook & Keeper |
| Lashing Capacity | 2.5t |
The Beaver 50mm Multi-Purpose Ratchet Tie-Down Assembly 2.5t x 12m is a webbing restraint for strapping loads down on trays, floats and flat tops. At 12m, this is the long option in the range, so it suits wide machinery, stacked pallets and anything that needs the strap to run over and around the load before it comes back to the anchor point.
Webbing is 50mm wide with a lashing capacity of 2.5t, and the assembly weighs 3.4kg. Each end runs a hook and keeper, and two protective sleeves are fitted to take the rub where the strap crosses a hard edge. It complies to AS/NZS 4380. Check the webbing for cuts, cuts and fraying before every use, and keep the ratchet clean so the pawl seats properly.
| Product Code | Description | Hook Type | Width | Length | LC | Weight | UOM |
|---|---|---|---|---|---|---|---|
| RTD050LD06S | 50mm x 6m c/w "S" Hooks L/Duty | S | 50mm | 6m | 500kg | 1.5kg | Each |
| RTD050LD06H | 50mm x 6m c/w Hook & Keeper L/Duty | Hook & Keeper | 50mm | 6m | 1000kg | 1.6kg | Each |
| RTD055PL-4 | 50mm x 4m c/w Hook & Keeper | Hook & Keeper | 50mm | 4m | 2500kg | 1.2kg | Each |
| RTD050HD08J | 50mm x 8m H/D Ratchet Assy. f/w J Hook | J Hook | 50mm | 8m | 2500kg | 2.8kg | Each |
| RTD055PL | 50mm x 9m c/w Hook & Keeper | Hook & Keeper | 50mm | 9m | 2500kg | 3.1kg | Each |
| RTD055PL-12 | 50mm x 12m c/w Hook & Keeper | Hook & Keeper | 50mm | 12m | 2500kg | 3.4kg | Each |
Questions about this equipment? Send us a message and we’ll check it against the job.