
| LC | 2500kg |
| UOM | Each |
| Width | 50mm |
| Length | 9m |
| Weight | 3.1kg |
| Hook Type | Hook & Keeper |
| Description | 50mm x 9m c/w Hook & Keeper |
| Lashing Capacity | 2.5t |
The Beaver 50mm Multi-Purpose Ratchet Tie-Down Assembly is a load restraint strap for holding freight, plant and steel down on a truck or trailer. This one runs 50mm wide webbing with a 2.5t lashing capacity and a 9m length, so it suits wider decks and taller loads where a shorter strap runs out of webbing before you get a wrap over the top.
Each end is fitted with a hook and keeper, and two protective sleeves come with it to keep the webbing off sharp edges and corners. At 3.1kg it is still easy enough to throw over a load and tension by hand. Complies to AS/NZS 4380. Check the webbing for cuts, cord damage and heat marks before every use, and keep the ratchet clean and lightly oiled.
| Product Code | Description | Hook Type | Width | Length | LC | Weight | UOM |
|---|---|---|---|---|---|---|---|
| RTD050LD06S | 50mm x 6m c/w "S" Hooks L/Duty | S | 50mm | 6m | 500kg | 1.5kg | Each |
| RTD050LD06H | 50mm x 6m c/w Hook & Keeper L/Duty | Hook & Keeper | 50mm | 6m | 1000kg | 1.6kg | Each |
| RTD055PL-4 | 50mm x 4m c/w Hook & Keeper | Hook & Keeper | 50mm | 4m | 2500kg | 1.2kg | Each |
| RTD050HD08J | 50mm x 8m H/D Ratchet Assy. f/w J Hook | J Hook | 50mm | 8m | 2500kg | 2.8kg | Each |
| RTD055PL | 50mm x 9m c/w Hook & Keeper | Hook & Keeper | 50mm | 9m | 2500kg | 3.1kg | Each |
| RTD055PL-12 | 50mm x 12m c/w Hook & Keeper | Hook & Keeper | 50mm | 12m | 2500kg | 3.4kg | Each |
Questions about this equipment? Send us a message and we’ll check it against the job.