Beaver Herringbone Protective Sleeve 300mm
PSL300HERper Metre
$60.40 inc GSTTrade $54.36, save $6.04Trade accounts save 10%. Apply with your ABN
| Suit Sling Diameter | 300mm |
| Suit Flat Sling Size | 10t |
| Suit Round Sling Size | - |
About this product
The Beaver Herringbone Protective Sleeve 300mm is a polyester wear sleeve that slips over your webbing to keep sharp edges and abrasive loads off the sling body. This is the widest end of the range, made to suit a 300mm sling diameter and matched to 10t flat slings, so it is the one you reach for when you are lifting with heavy webbing rather than light gear.
The strong herringbone weave polyester takes the rub where the sling meets the load, which means the sling itself lasts longer and stays serviceable. Sleeves are made to custom lengths, and you can specify sewn or velcro depending on whether you want it fixed in place or fitted and removed on the job. Simple bit of kit, and cheaper than replacing a 10t sling early.
Common questions
- what size sling does the 300mm herringbone sleeve fit
- It suits a 300mm sling diameter and is matched to 10t flat slings. Smaller sizes in the Beaver range cover lighter slings.
- what is the beaver protective sleeve made of
- Strong herringbone weave polyester, which handles the abrasion where the sling contacts the load.
- sewn or velcro protective sling sleeve which is better
- Sewn sleeves stay fixed on the sling, velcro lets you fit and remove the sleeve or reposition it on the job. Both options are available in this range.
Full specifications
| Product Code | Suit Sling Diameter | Suit Flat Sling Size | Suit Round Sling Size |
|---|---|---|---|
| PSL050HER | 50mm | 1t | 1t, 2t |
| PSL065HER | 65mm | 2t | 3t |
| PSL075HER | 75mm | 2t | - |
| PSL090HER | 90mm | 3t | - |
| PSL120HER | 120mm | 4t | 5t |
| PSL150HER | 150mm | 5t | 6t, 8t |
| PSL240HER | 240mm | 8t | - |
| PSL300HER | 300mm | 10t | - |
Questions about this equipment? Send us a message and we’ll check it against the job.