
| Suit Sling Diameter | 120mm |
| Suit Flat Sling Size | 4t |
| Suit Round Sling Size | 5t |
The Beaver PVC Protective Sleeve 120mm slips over your webbing to keep abrasion and sharp load edges off the sling body. This size suits a 120mm sling diameter, which covers 4t flat slings and 5t round slings, so it sits on the heavier end of the range rather than light general lifting. PVC construction does two jobs at once. It takes the wear that would otherwise chew through your sling, and it adds grip on smooth or slippery loads where the sling wants to slide.
Sleeves are made to custom lengths, and you can go with sewn or velcro, depending on whether you want it fixed in place or fitted and removed as needed. Velcro is handy when the same sleeve moves between slings on site. Check it over along with your sling and swap it out once the PVC is worn through, because a tired sleeve stops protecting the webbing underneath.
| Product Code | Suit Sling Diameter | Suit Flat Sling Size | Suit Round Sling Size |
|---|---|---|---|
| PSL038PVC | 50mm | 1t | 1t, 2t |
| PSL050PVC | 65mm | 2t | 3t |
| PSL065PVC | 90mm | 3t | - |
| PSL075PVC | 100mm | 3t | 4t |
| PSL100PVC | 120mm | 4t | 5t |
| PSL150PVC | 200mm | 6t | 10t |
| PSL200PVC | 300mm | 10t | - |
Questions about this equipment? Send us a message and we’ll check it against the job.