Beaver Heavy-Duty Webbing Protective Sleeve 60mm
PSL075WEBper Metre
$58.75 inc GSTTrade $52.88, save $5.87Trade accounts save 10%. Apply with your ABN
| Suit Sling Diameter | 60mm |
| Suit Flat Sling Size | - |
| Suit Round Sling Size | 2t |
About this product
The Beaver Heavy-Duty Webbing Protective Sleeve 60mm is a polyester wear sleeve that slips over a sling to shield the webbing from sharp edges and abrasive loads. This size suits a 60mm sling diameter, which lines up with a 2t round sling, so it is the one to grab when your crews are running lighter round slings on rough steel or concrete.
Made from heavy duty sling webbing, it is built for high abrasion work where a bare sling would fray out in no time. Sewn or velcro options are available, and lengths are made to suit the job, so you can cover a single contact point or run protection along a longer stretch. Slide it into position, check it for cuts and wear before each lift, and replace the sleeve rather than the sling.
Common questions
- what size sling does the 60mm Beaver protective sleeve fit
- It suits a 60mm sling diameter, which matches a 2t round sling.
- what are Beaver protective sleeves made of
- Heavy duty polyester sling webbing, chosen for high abrasion applications.
- sewn or velcro sling sleeve which is better
- Both options are available in this range. Sewn sleeves stay fixed on the sling, while velcro lets you fit and remove the sleeve without threading it over the eye.
Full specifications
| Product Code | Suit Sling Diameter | Suit Flat Sling Size | Suit Round Sling Size |
|---|---|---|---|
| PSL050WEB | 35mm | 0.5t | - |
| PSL065WEB | 50mm | 1t | 1t, 2t |
| PSL075WEB | 60mm | - | 2t |
| PSL090WEB | 65mm | 2t | 3t |
| PSL120WEB | 90mm | 3t | 4t |
| PSL150WEB | 120mm | 4t | 5t |
| PSL200WEB | 150mm | 5t | 6t, 8t |
| PSL240WEB | 180mm | 6t | 10t |
| PSL300WEB | 240mm | 8t | - |
Questions about this equipment? Send us a message and we’ll check it against the job.