Beaver Herringbone Protective Sleeve 75mm
PSL075HERper Metre
$36.70 inc GSTTrade $33.03, save $3.67Trade accounts save 10%. Apply with your ABN
| Suit Sling Diameter | 75mm |
| Suit Flat Sling Size | 2t |
| Suit Round Sling Size | - |
About this product
The Beaver Herringbone Protective Sleeve 75mm is a slide-on wear sleeve that shields your webbing from sharp edges and abrasive loads. This size suits a 75mm sling diameter, which lines up with 2t flat slings, so it is the one to grab when your 2t webbing is taking a beating on steel edges or concrete.
It is made from a strong herringbone weave polyester that takes the wear instead of the sling itself, keeping the load-bearing webbing in service longer. Lengths are made to order, and you can choose between sewn or velcro. Velcro lets you wrap the sleeve on and reposition it where the contact point is, while sewn stays put on the one sling. Either way, check the sleeve for cuts and fraying at the same time you inspect the sling.
Common questions
- what size sling does the 75mm herringbone sleeve fit
- It suits a 75mm sling diameter, which corresponds to 2t flat slings.
- what is the beaver herringbone protective sleeve made of
- Strong herringbone weave polyester, which absorbs the abrasion instead of the sling webbing.
- sewn or velcro protective sleeve, which is better
- Velcro can be wrapped on and moved to the contact point on the sling, while sewn stays fixed on the one sling. Both options are available in this range.
Full specifications
| Product Code | Suit Sling Diameter | Suit Flat Sling Size | Suit Round Sling Size |
|---|---|---|---|
| PSL050HER | 50mm | 1t | 1t, 2t |
| PSL065HER | 65mm | 2t | 3t |
| PSL075HER | 75mm | 2t | - |
| PSL090HER | 90mm | 3t | - |
| PSL120HER | 120mm | 4t | 5t |
| PSL150HER | 150mm | 5t | 6t, 8t |
| PSL240HER | 240mm | 8t | - |
| PSL300HER | 300mm | 10t | - |
Questions about this equipment? Send us a message and we’ll check it against the job.