
| Sling Length | 1m |
| Working Load Limit | 0.5t |
The Beaver Single-Ply Endless Flat Sling 0.5t x 1m is a continuous polyester webbing loop for light lifts where you don't want to mark the load. At 1m circumference and a 0.5t working load limit, it's the size you reach for on small motors, fittings, valves and short choke hitches in tight spots. Light enough to carry a few of them on your belt.
The flat webbing spreads the load over a wide contact area, so it cushions against damage and grips better than a bare chain or wire. Polyester has low stretch, which keeps load bounce out of the lift. Made to AS 1353.1, with a test certificate available on request. Check the webbing for cuts, abrasion and heat damage before every use, and keep it clear of sharp edges.
| Product Code | WLL | Width | Lengths Available | Colour |
|---|---|---|---|---|
| ES-1-250X0.5, ES-1-250X1, ES-1-250X1.5, ES-1-250X2 | 0.25t | 25mm | 0.5m, 1m, 1.5m, 2m | White |
| ES-1-500X0.5, ES-1-500X1, ES-1-500X1.5, ES-1-500X2, ES-1-500X3 | 0.5t | 35mm | 0.5m, 1m, 1.5m, 2m, 3m | White |
| ES-1-1000X1, ES-1-1000X1.5, ES-1-1000X2, ES-1-1000X3, ES-1-1000X4, ES-1-1000X6 | 1t | 50mm | 1m, 1.5m, 2m, 3m, 4m, 6m | White |
| ES-1-2000X1, ES-1-2000X1.5, ES-1-2000X2, ES-1-2000X3.5, ES-1-2000X4, ES-1-2000X6 | 2t | 60mm | 1m, 1.5m, 2m, 3.5m, 4m, 6m | White |
| ES-1-3000X1, ES-1-3000X1.5, ES-1-3000X2, ES-1-3000X3, ES-1-3000X4, ES-1-3000X6 | 3t | 90mm | 1m, 1.5m, 2m, 3m, 4m, 6m | Yellow |
Questions about this equipment? Send us a message and we’ll check it against the job.