
| Break Load | 70t |
| Rope Length | 6m |
The Mongoose Heavy Duty Strop 70t x 6m is a 12 strand UHMwPE tow rope built for recovering heavy gear, light vehicles and 4x4s. At 70t break load it sits at the heavier end of the range, so it suits machinery and loaded trucks rather than light recovery work. The 6m rope length gives you enough room to get a tow vehicle clear of soft ground without dragging out a second strop.
Each end carries a heavily protected 200mm soft eye splice, and the whole length runs under a tight heavy duty HT polyester cover to handle wear and flex fatigue. UHMwPE gives a high strength to weight ratio, so a 70t strop is still light enough for one person to move around a work area. Low elongation means minimal recoil and kinetic energy at break. The pink colour keeps it visible, and durable ID tags handle traceability.
| Finished Diameter | Break Load | Length | Weight |
|---|---|---|---|
| 32mm | 30t | 6m | 4.5kg |
| 32mm | 30t | 10m | 7kg |
| 32mm | 30t | 15m | 10.5kg |
| 32mm | 30t | 20m | 14kg |
| 38mm | 50t | 1m | 2kg |
| 38mm | 50t | 3m | 4kg |
| 38mm | 50t | 6m | 6.5kg |
| 38mm | 50t | 10m | 10kg |
| 38mm | 50t | 15m | 15kg |
| 38mm | 50t | 20m | 20.5kg |
| 44mm | 70t | 1m | 2.5kg |
| 44mm | 70t | 3m | 4.5kg |
| 44mm | 70t | 6m | 7.5kg |
| 44mm | 70t | 10m | 13kg |
| 44mm | 70t | 15m | 17kg |
| 44mm | 70t | 20m | 28kg |
| 48mm | 100t | 6m | 12kg |
| 48mm | 100t | 10m | 15.5kg |
| 48mm | 100t | 15m | 29.5kg |
| 48mm | 100t | 20m | 34kg |
| 65mm | 150t | 10m | 24kg |
| 65mm | 150t | 20m | 47kg |
| 75mm | 200t | 15m | 45.5kg |
| 82mm | 300t | 15m | 65kg |
Questions about this equipment? Send us a message and we’ll check it against the job.