
| Break Load | 50t |
| Rope Length | 6m |
The Mongoose Heavy Duty Strop 50t x 6m is a 12 strand UHMwPE tow rope built for recovering heavy gear, light vehicles and 4x4s. The 50t break load puts this size at the top end of the range, and the 6m length gives you enough room to keep the recovery vehicle clear of a bogged machine. UHMwPE gives a very high strength to weight ratio, so a rope this size stays light enough to drag out and rig by hand.
Each end carries a 200mm soft eye splice with heavy protection, and the whole rope runs inside a tight HT polyester cover to handle wear and flex fatigue. Elongation is low, so there is minimal recoil and kinetic energy if it does let go. The pink colour keeps it visible on site. Durable ID tags stay with the strop for traceability, and it is certified to its tonnage rating.
| Finished Diameter | Break Load | Length | Weight |
|---|---|---|---|
| 32mm | 30t | 6m | 4.5kg |
| 32mm | 30t | 10m | 7kg |
| 32mm | 30t | 15m | 10.5kg |
| 32mm | 30t | 20m | 14kg |
| 38mm | 50t | 1m | 2kg |
| 38mm | 50t | 3m | 4kg |
| 38mm | 50t | 6m | 6.5kg |
| 38mm | 50t | 10m | 10kg |
| 38mm | 50t | 15m | 15kg |
| 38mm | 50t | 20m | 20.5kg |
| 44mm | 70t | 1m | 2.5kg |
| 44mm | 70t | 3m | 4.5kg |
| 44mm | 70t | 6m | 7.5kg |
| 44mm | 70t | 10m | 13kg |
| 44mm | 70t | 15m | 17kg |
| 44mm | 70t | 20m | 28kg |
| 48mm | 100t | 6m | 12kg |
| 48mm | 100t | 10m | 15.5kg |
| 48mm | 100t | 15m | 29.5kg |
| 48mm | 100t | 20m | 34kg |
| 65mm | 150t | 10m | 24kg |
| 65mm | 150t | 20m | 47kg |
| 75mm | 200t | 15m | 45.5kg |
| 82mm | 300t | 15m | 65kg |
Questions about this equipment? Send us a message and we’ll check it against the job.