
| Break Load | 50t |
| Rope Length | 3m |
The Mongoose Heavy Duty Strops 50t x 3m is a 12 strand UHMwPE tow rope for recovering heavy gear, light vehicles and 4x4s. At 50t break load it sits at the heavy end of the range, and the short 3m length keeps the pull tight when you are working in close or snatching a bogged machine off a pad. Each end has a 200mm soft eye splice with heavy protection, and the whole rope runs inside a tight HT polyester cover.
UHMwPE gives you a high strength to weight ratio, so a 50t rated strop stays light enough to handle and coil by hand without a second set of arms. Elongation is low, which means minimal recoil and kinetic energy if it lets go. The pink colour keeps it visible on site, durable ID tags handle traceability, and each strop is certified to its tonnage rating. It stands up well to wear and flex fatigue.
| Finished Diameter | Break Load | Length | Weight |
|---|---|---|---|
| 32mm | 30t | 6m | 4.5kg |
| 32mm | 30t | 10m | 7kg |
| 32mm | 30t | 15m | 10.5kg |
| 32mm | 30t | 20m | 14kg |
| 38mm | 50t | 1m | 2kg |
| 38mm | 50t | 3m | 4kg |
| 38mm | 50t | 6m | 6.5kg |
| 38mm | 50t | 10m | 10kg |
| 38mm | 50t | 15m | 15kg |
| 38mm | 50t | 20m | 20.5kg |
| 44mm | 70t | 1m | 2.5kg |
| 44mm | 70t | 3m | 4.5kg |
| 44mm | 70t | 6m | 7.5kg |
| 44mm | 70t | 10m | 13kg |
| 44mm | 70t | 15m | 17kg |
| 44mm | 70t | 20m | 28kg |
| 48mm | 100t | 6m | 12kg |
| 48mm | 100t | 10m | 15.5kg |
| 48mm | 100t | 15m | 29.5kg |
| 48mm | 100t | 20m | 34kg |
| 65mm | 150t | 10m | 24kg |
| 65mm | 150t | 20m | 47kg |
| 75mm | 200t | 15m | 45.5kg |
| 82mm | 300t | 15m | 65kg |
Questions about this equipment? Send us a message and we’ll check it against the job.