
| F | 55.5mm |
| R | 48mm |
| S | 16.2mm |
| WLL | 10t |
| Finish | Blue Painted |
| m/100kg | 20m/100kg |
| Nominal Size | 16mm |
The Beaver BV100 G100 Lifting Chain 16mm is grade 100 alloy steel chain for building chain slings and overhead lifting assemblies. This is the heavy end of the range, with a 10t working load limit on a single leg and a 16.2mm material size, so it suits the bigger lifts where a smaller chain runs out of capacity. Pitch is 48mm, outside width 55.5mm, and it runs at 20m per 100kg.
Made from hardened and heat-treated alloy steel with a blue painted electrophoresis finish, it holds up well against wear and is self-lubricating, so no oiling is needed. Grade 100 carries 25% more load than grade 80 at the same size, with a 30% weight saving. Suits single, two, three and four leg sling configurations. Complies to AS 2321.
| Product code | Nominal Size | WLL | S | R | F | Finish | m/100kg |
|---|---|---|---|---|---|---|---|
| CHAINBV100008MM | 8mm | 2.5t | 8.2mm | 24mm | 27.5mm | Blue Painted | 70m/100kg |
| CHAINBV100010MM | 10mm | 4t | 10.2mm | 30mm | 34.5mm | Blue Painted | 50m/100kg |
| CHAINBV100013MM | 13mm | 6.7t | 13.2mm | 39mm | 45mm | Blue Painted | 26m/100kg |
| CHAINBV100016MM | 16mm | 10t | 16.2mm | 48mm | 55.5mm | Blue Painted | 20m/100kg |
| CHAINBV100020MM | 20mm | 16t | 20.2mm | 60mm | 68mm | Blue Painted | 12m/100kg |
| CHAINBV100022MM | 22mm | 19t | 22mm | 66mm | 73.5mm | Blue Painted | 10m/100kg |
Questions about this equipment? Send us a message and we’ll check it against the job.