
| F | 34.5mm |
| R | 30mm |
| S | 10.2mm |
| WLL | 4t |
| Finish | Blue Painted |
| m/100kg | 50m/100kg |
| Nominal Size | 10mm |
The Beaver BV100 G100 Lifting Chain 10mm is grade 100 alloy steel chain for building overhead lifting slings, rated to a 4t working load limit on a single leg. It is made from hardened and heat-treated alloy steel with a blue painted finish, and the material weight works out at 50m/100kg. Pitch measures 30mm, outside width 34.5mm, with a measured bar of 10.2mm.
Grade 100 gives 25% higher load capacity than grade 80 at the same size, plus a 30% weight saving, so a 10mm chain does the work of heavier gear. The heat treatment helps it stand up to wear, and the electrophoresis surface treatment is self-lubricating, so no oiling is needed down the track. Suits single, 2, 3 and 4 leg sling assemblies. Complies to AS 2321.
| Product code | Nominal Size | WLL | S | R | F | Finish | m/100kg |
|---|---|---|---|---|---|---|---|
| CHAINBV100008MM | 8mm | 2.5t | 8.2mm | 24mm | 27.5mm | Blue Painted | 70m/100kg |
| CHAINBV100010MM | 10mm | 4t | 10.2mm | 30mm | 34.5mm | Blue Painted | 50m/100kg |
| CHAINBV100013MM | 13mm | 6.7t | 13.2mm | 39mm | 45mm | Blue Painted | 26m/100kg |
| CHAINBV100016MM | 16mm | 10t | 16.2mm | 48mm | 55.5mm | Blue Painted | 20m/100kg |
| CHAINBV100020MM | 20mm | 16t | 20.2mm | 60mm | 68mm | Blue Painted | 12m/100kg |
| CHAINBV100022MM | 22mm | 19t | 22mm | 66mm | 73.5mm | Blue Painted | 10m/100kg |
Questions about this equipment? Send us a message and we’ll check it against the job.