Safetyline 25Mtx11mm Kermantle C/W Bsm0012 Rope Adjuster And Bsk0002Tc
BS010325A-TCper Each
$174.08 inc GSTTrade $156.67, save $17.41Trade accounts save 10%. Apply with your ABN
About this product
The Safetyline 25Mtx11mm Kermantle C/W Bsm0012 Rope Adjuster And Bsk0002Tc is a ready to go rope line for height safety work, giving you 25 metres of 11mm kernmantle rope with the adjuster and connector already matched to it. Kernmantle construction means a load bearing core inside a protective outer sheath, so the rope handles abrasion from edges and structure while keeping its handling characteristics.
The BSM0012 rope adjuster travels along the 11mm line and lets the user set their working position, then holds it. The BSK0002TC connector finishes the assembly off at the anchor end. At 25 metres it suits roof work, tower and structure access, and plant maintenance where a worker needs to move up and down a fixed line. Check the sheath for cuts, glazing and fraying before every use, and pull the rope from service if the core is exposed.
Common questions
- how long is the safetyline kernmantle rope
- It is 25 metres of 11mm kernmantle rope.
- what is kernmantle rope and why use it for rope access
- Kernmantle rope has a load bearing core wrapped in a woven outer sheath. The sheath takes the abrasion from edges and steelwork so the core stays protected.
- what does the bsm0012 rope adjuster do
- It runs along the 11mm rope so the user can set their working position and hold it there. The BSK0002TC connector is supplied with it.
- how do I inspect an 11mm kernmantle line
- Run the full 25 metres through your hands and look for cuts, fraying or glazed sections in the sheath. Any rope with the core showing through should be taken out of service.
Questions about this equipment? Send us a message and we’ll check it against the job.