
| % ED | 25 |
| Speed | 12-18m/min |
| Weight | 136kg |
| Motor Power | 2.5HP |
| Rated Capacity | 0.5t |
| Effective Pull Height | 58m |
| Wire Rope Diameter x Length | 9mm x 60mm |
The Beaver Electric Three Phase Winches 0.5t is a mains powered pulling and lifting winch for building sites, slipways and general industrial work. This is the lightest of the three sizes in the range at 136kg, with a 500kg rated capacity driven by a 2.5HP motor. Line speed runs 12 to 18m/min and the 9mm wire rope gives an effective pull height of 58m. Duty cycle is 25% ED.
Control is through a 24V IP65 pendant with an emergency stop. An automatic load brake and overload clutch look after the load, and the rope is fixed to the drum with a set screw so it stays put. Cast steel foot mountings let you bolt it down solid. Complies to AS1418.2.
| Product Code | Rated Capacity | Speed | Motor Power | % ED | Effective Pull Height | Wire Rope Diameter x Length | Weight |
|---|---|---|---|---|---|---|---|
| BPL3050 | 0.5t | 12-18m/min | 2.5HP | 25 | 58m | 9mm x 60mm | 136kg |
| BPL3100 | 1t | 12-18m/min | 5HP | 25 | 58m | 11mm x 60mm | 156kg |
| Rated Capacity | A | B | C | D | E | F |
|---|---|---|---|---|---|---|
| 0.5t | 4 x 10.5D | 400mm | 330mm | 922mm | 372mm | 430mm |
| 1t | 4 x 10.5D | 400mm | 330mm | 935mm | 372mm | 430mm |
Questions about this equipment? Send us a message and we’ll check it against the job.