
| Model Number | BHW800 |
The Beaver Brake Hand Winches BHW800 is a hand cranked winch for pulling and lifting, sized as one of four models in the Beaver brake winch range. The positive load actuated brake holds the load wherever you stop cranking, so you can pause mid pull without it running away on you. Gears are heat treated and built to close tolerances, which keeps the noise down and the action smooth.
Mechanical components sit enclosed, keeping grit out and hands clear of moving parts. The handle is strong and comes off when you need it gone, and the whole unit stays light enough to carry to the job by hand. A practical option where a powered hoist is overkill, on site work, in the workshop, or anywhere you need controlled movement of a load without a power source.
| Model No. Bare | BHW800 | BHW1200 | BHW1800 | BHW2600 |
|---|---|---|---|---|
| Model No. Wire Rope | BHW800 | BHW1200R | BHW1800R | BHW2600R |
| Rated Capacity - Pulling (Kg) (kN) | 370/3.63 | 550/5.39 | 820/8.04 | 1200/11.77 |
| Rated Capacity - Hoisting (Kg) | 185 | 275 | 410 | 600 |
| Type of Brake | Single Paw | Single Paw | Double Paw | Double Paw |
| Max Hand Force Req. (kg) | 14.5 | 15 | 22 | 19 |
| Gear Ratio | 4:1:1 | 4:1:1 | 5:1 | 10:1 |
| Hub Diamater (mm) | Ø40 | Ø50 | Ø70 | Ø82 |
| Handle Length (mm) | 160 | 210 | 320 | 320 |
| Unit Weight - Bare (kg) | 3 | 3.5 | 8 | 10.5 |
| Wire Rope Diameter (mm) | 4 | 5 | 6 | 8 |
| Wire Rope Construction | 7x19 RHOL | 7x19 RHOL | 7x19 RHOL | 7x19 RHOL |
| Grade of Wire Rope | G2070 | G2070 | G2070 | G2070 |
| Wire Rope Finish | Galvanised | Galvanised | Galvanised | Galvanised |
| Wire Rope Storage Capacity (m) | 36 | 23 | 24 | 18 |
Questions about this equipment? Send us a message and we’ll check it against the job.