Ansell HyFlex Cut Resist Glove Cut D, Touchscreen, Nitrile Grey x Size 8
AN0011571GY0008per Each
$24.43 inc GSTTrade $21.99, save $2.44Trade accounts save 10%. Apply with your ABN
| Size | Size 8 |
| Colour | Grey |
About this product
The Ansell HyFlex Cut Resist Glove Cut D in size 8 is a lightweight cut level D hand protection glove for riggers, fitters and trades handling sharp edges, plate, strapping and sheet metal. Size 8 is the mid-range fit, so it suits most average adult hands and is usually the first size to move off a site shelf. The grey nitrile coating gives grip on oily steel without the bulk of a heavier dipped glove.
Cut resistance comes from a next generation single HPPE yarn, which keeps the glove thin while holding up to abrasion and repeat wear. Fingertips are touchscreen compatible, handy when you are working off a tablet or phone between lifts. It is rated to EN 388:2016 4X43D and EN 16350, and forms part of the Ansell Earth sustainably made range. Check the palm and fingers for wear or cuts before each shift and replace once the coating breaks through.
Common questions
- what cut level is the ansell hyflex cut d glove
- It is a cut level D glove, rated EN 388:2016 4X43D. That covers work around sharp plate, strapping and sheet metal edges.
- is ansell hyflex size 8 a medium
- Size 8 sits in the middle of the range, which runs 6 to 12, so it suits most average adult hands.
- can you use a phone with ansell hyflex cut d gloves
- Yes, the glove is touchscreen compatible, so you can use a phone or tablet without pulling it off.
- what is the ansell hyflex cut d glove made from
- The liner uses a next generation single HPPE yarn with a grey nitrile coating for grip and abrasion resistance.
Questions about this equipment? Send us a message and we’ll check it against the job.