S/S Swageless Clevis Rigging Tensioner M12 X 8
781812Aper Each
$165.63 inc GSTTrade $149.07, save $16.56Trade accounts save 10%. Apply with your ABN
About this product
The S/S Swageless Clevis Rigging Tensioner M12 X 8 is a stainless tensioner for 8mm stainless steel cable, letting you pull up and adjust a wire run without a swage press. The swageless termination grips the cable on site, so you cut to length and terminate with hand tools. The M12 thread and clevis end pin straight onto a bracket, post or fitting.
Built in 316 stainless steel and electro polished, it holds up well in coastal air and wash-down areas where plated fittings stain out. Adjustment range runs from 270mm to 395mm, which gives you plenty of take-up for balustrade wire, cable barriers and architectural rigging. Every unit gets a 100% visual inspection, and the raw materials are held to relevant safety requirements.
Common questions
- what size cable does the M12 x 8 swageless tensioner take
- It suits 8mm stainless steel cable. The swageless termination lets you terminate the wire on site without swaging gear.
- is this rigging tensioner suitable for coastal or marine use
- Yes, it is made from 316 stainless steel and electro polished, which handles salt air and wet environments better than plated fittings.
- how much adjustment does the M12 x 8 clevis tensioner give
- Overall length adjusts between 270mm and 395mm, so you get a good range of take-up once the cable is terminated.
Questions about this equipment? Send us a message and we’ll check it against the job.