Beaver G316 Stainless Steel Wire Rope - 7x19 2.4mm
720025per Metre
$1.36 inc GSTTrade $1.22, save $0.14Trade accounts save 10%. Apply with your ABN
| Lay | RHOL |
| MBF | 3.64kN |
| Grade | 316 |
| Finish | Stainless Steel |
| Diameter | 2.4mm |
| Approx Mass | 2.38kg/100m |
| Construction | 7x19 |
| Wire Diameter | 2.4mm |
About this product
The Beaver G316 Stainless Steel Wire Rope in 7x19 construction is a flexible marine grade rope for fixed rigging and light running applications like boat winches. At 2.4mm, this is one of the finer sizes in the range, with a minimum breaking force of 3.64kN and an approximate mass of 2.38kg/100m, so it suits balustrade infill, light stays and control runs rather than heavy lifting work.
Grade 316 stainless gives it better corrosion resistance than G304, which is why it holds up in salt water, coastal air and waste management jobs. It is also used in food and pharmaceutical processing. The lay is RHOL and the 7x19 make-up, seven strands of nineteen wires, keeps the rope supple enough to run over sheaves and pull up neatly through fittings. Handy where a thin, tidy line is wanted outdoors.
Common questions
- what is the breaking strain of 2.4mm 7x19 stainless wire rope
- This 2.4mm Beaver G316 rope has a minimum breaking force of 3.64kN. That is a breaking figure, not a working load limit, so apply your own design factor.
- is G316 stainless wire rope ok for salt water
- Yes, Grade 316 is marine grade stainless and has higher corrosion resistance than G304, so it performs better in salt water and coastal environments.
- g316 vs g304 stainless wire rope which one do i need
- Both are stainless, but G316 handles harsher corrosive conditions such as salt water better than G304. For boats, coastal sites and waste management, go the G316.
Full specifications
| Product Code | Diameter | Construction | Grade | Finish | Lay | MBF | Approx Mass |
|---|---|---|---|---|---|---|---|
| 720016 | 1.6mm | 7x19 | 316 | Stainless Steel | RHOL | 1.9kN | 1.03kg/100m |
| 720025 | 2.4mm | 7x19 | 316 | Stainless Steel | RHOL | 3.64kN | 2.38kg/100m |
| 720030 | 3.2mm | 7x19 | 316 | Stainless Steel | RHOL | 5.24kN | 4.18kg/100m |
| 720040 | 4mm | 7x19 | 316 | Stainless Steel | RHOL | 8.21kN | 6.71kg/100m |
| 720050 | 5mm | 7x19 | 316 | Stainless Steel | RHOL | 11.08kN | 9.5kg/100m |
| 720060 | 6.4mm | 7x19 | 316 | Stainless Steel | RHOL | 21.01kN | 17kg/100m |
| 720080 | 8mm | 7x19 | 316 | Stainless Steel | RHOL | 32.85kN | 26.9kg/100m |
Questions about this equipment? Send us a message and we’ll check it against the job.