Beaver G2070 Galvanised Wire Rope - 6x25 11mm
712411per Each
$4.59 inc GSTTrade $4.13, save $0.46Trade accounts save 10%. Apply with your ABN
| Lay | RHOL |
| MBF | 89kN |
| Core | Wire |
| Grade | 2070 |
| Finish | Galvanised |
| Approx Mass | 50.9kg/100m |
| Construction | 6x25 |
| Wire Diameter | 11mm |
About this product
The Beaver G2070 Galvanised Wire Rope in 11mm is a general purpose hoisting and winching rope built on a 6x25 construction with a wire core. It runs a right hand ordinary lay and carries a minimum breaking force of 89kN, so it suits winch drums, sheave work and static reeving where you need a rope that holds its shape under load.
Grade 2070 wire gives the strength, and the galvanised finish adds a layer of corrosion protection for gear that lives outdoors or around wash bays and coastal sites. At roughly 50.9kg per 100m it is manageable to handle and spool without a crew. Keep an eye on broken wires, kinks and flattening, and lubricate it regularly to get the full service life out of it.
Common questions
- what is the breaking strain of 11mm 6x25 wire rope
- This 11mm Beaver G2070 rope has a minimum breaking force of 89kN. Any working load limit depends on the design factor for your application.
- is beaver g2070 wire rope galvanised or stainless
- It is galvanised grade 2070 steel wire, not stainless. The zinc coating gives it corrosion protection for outdoor and damp environments.
- what does 6x25 rhol mean on wire rope
- 6x25 describes the rope construction, six strands of 25 wires each, here laid over a wire core. RHOL means right hand ordinary lay.
Full specifications
| Product code | Wire Diameter | Construction | Grade | Finish | Core | Lay | MBF | Approx Mass |
|---|---|---|---|---|---|---|---|---|
| 712411 | 11mm | 6x25 | 2070 | Galvanised | Wire | RHOL | 89kN | 50.9kg/100m |
Questions about this equipment? Send us a message and we’ll check it against the job.