Beaver G2070 A2 Lube Galvanised Wire Rope 10mm 6X25IWRC 10mm
712310per Each
$4.16 inc GSTTrade $3.74, save $0.42Trade accounts save 10%. Apply with your ABN
| Lay | RHOL |
| MBF | 73.52kN |
| Core | Wire |
| Grade | 2070 |
| Finish | Galvanised |
| Approx Mass | 41.8kg/100m |
| Construction | 6x25 |
| Wire Diameter | 10mm |
About this product
The Beaver G2070 A2 Lube Galvanised Wire Rope is a 10mm general purpose rope built for winching, hoisting and crane duties where you need flexibility without giving up strength. It runs a 6x25 construction over an independent wire rope core, so it holds its shape under load and resists crushing on the drum better than a fibre core rope.
Grade 2070 with a minimum breaking force of 73.52kN, right hand ordinary lay, and a galvanised finish to slow down corrosion on exposed sites and coastal jobs. The A2 lubrication carries through the rope to cut internal wear as the strands work against each other. Approximate mass is 41.8kg per 100m, which keeps handling reasonable for a rope this size. Check for broken wires, kinks and flattening before each use, and keep it lubricated in service.
Common questions
- What is the breaking strain of 10mm Beaver G2070 wire rope?
- The minimum breaking force is 73.52kN. Your working load depends on the fitting and the design factor applied by the rigging setup.
- What does 6x25 IWRC mean on wire rope?
- It means 6 strands of 25 wires laid around an independent wire rope core. The steel core gives better crush resistance and holds shape under load compared with a fibre core.
- Is galvanised wire rope suitable for outdoor and coastal use?
- The galvanised finish gives this rope a good level of corrosion protection for exposed sites. Keep it lubricated and inspect it regularly for rust, broken wires and kinks.
Full specifications
| Product code | Wire Diameter | Construction | Grade | Finish | Core | Lay | MBF | Approx Mass |
|---|---|---|---|---|---|---|---|---|
| 712310 | 10mm | 6x25 | 2070 | Galvanised | Wire | RHOL | 73.52kN | 41.8kg/100m |
Questions about this equipment? Send us a message and we’ll check it against the job.