
| A | 100mm |
| B | 13mm |
| C | M6 |
| Grade | 304 |
| Weight | 0.03kg |
| Thread Size | 6mm |
| Screw Length | 100mm |
The Beaver G304 Stainless Steel Eye Bolt with Nut and 2 Washers is a through-bolted anchor point for beams, panels and shade sail structures. This size runs an M6 thread on a 100mm screw length, so it suits thicker timber or deeper build-ups where a shorter bolt would not pull through and still leave enough thread for the nut. The eye measures 13mm and is fully welded, and the whole thing weighs in at 0.03kg.
Grade 304 stainless gives it good corrosion resistance, which matters for balustrading and shade sails left out in the weather year round. The nut and two flat washers come with it, so you can spread the load either side of the panel. One thing to be clear on. This is a fixing point only, not a lifting fitting, and it should never be used to lift a load.
| Product Code | Thread Size | A | B | C | Grade | Weight |
|---|---|---|---|---|---|---|
| 618451 | 5mm | 50mm | 11mm | M5 | 304 | 0.01kg |
| 618461 | 6mm | 40mm | 13mm | M6 | 304 | 0.02kg |
| 618462 | 6mm | 80mm | 13mm | M6 | 304 | 0.03kg |
| 618463 | 6mm | 55mm | 13mm | M6 | 304 | 0.02kg |
| 618464 | 6mm | 100mm | 13mm | M6 | 304 | 0.03kg |
| 618481 | 8mm | 80mm | 17mm | M8 | 304 | 0.06kg |
| 618482 | 8mm | 100mm | 17mm | M8 | 304 | 0.06kg |
| 618483 | 8mm | 120mm | 17mm | M8 | 304 | 0.07kg |
| 618493 | 10mm | 120mm | 21mm | M10 | 304 | 0.12kg |
| 618496 | 12mm | 120mm | 25mm | M12 | 304 | 0.17kg |
Questions about this equipment? Send us a message and we’ll check it against the job.