
| A | 40mm |
| B | 13mm |
| C | M6 |
| Grade | 304 |
| Weight | 0.02kg |
| Thread Size | 6mm |
| Screw Length | 40mm |
The Beaver G304 Stainless Steel Eye Bolt with Nut and 2 Washers 6mm x 40mm gives you a through-bolted anchor point in timber, panels or beams where you need a fixed eye rather than a screw-in hook. This is the smallest thread in the range at M6, with a 40mm screw length and a 13mm eye, so it suits thinner sections and lighter tie-off work like balustrading and shade sail structures.
The eye is fully welded, and the grade 304 stainless steel holds up well against corrosion outdoors and near the coast. It comes with one nut and two flat washers, so you can spread the load either side of the material and pull the assembly up tight. Worth noting, this is a fixing point only. It is not rated or intended for lifting.
| Product Code | Thread Size | A | B | C | Grade | Weight |
|---|---|---|---|---|---|---|
| 618451 | 5mm | 50mm | 11mm | M5 | 304 | 0.01kg |
| 618461 | 6mm | 40mm | 13mm | M6 | 304 | 0.02kg |
| 618462 | 6mm | 80mm | 13mm | M6 | 304 | 0.03kg |
| 618463 | 6mm | 55mm | 13mm | M6 | 304 | 0.02kg |
| 618464 | 6mm | 100mm | 13mm | M6 | 304 | 0.03kg |
| 618481 | 8mm | 80mm | 17mm | M8 | 304 | 0.06kg |
| 618482 | 8mm | 100mm | 17mm | M8 | 304 | 0.06kg |
| 618483 | 8mm | 120mm | 17mm | M8 | 304 | 0.07kg |
| 618493 | 10mm | 120mm | 21mm | M10 | 304 | 0.12kg |
| 618496 | 12mm | 120mm | 25mm | M12 | 304 | 0.17kg |
Questions about this equipment? Send us a message and we’ll check it against the job.