Beaver Wire Rope Nickle Plated Copper Ferrules 1.8mm x 3.6mm x 1.05mm
617416NPper Each
$1.05 inc GSTTrade $0.95, save $0.10Trade accounts save 10%. Apply with your ABN
| L | 6mm |
| a | 1.8mm |
| b | 3.6mm |
| c | 1.05mm |
| Size | 1.6mm |
| Dimensions A x B x C | 1.8mm x 3.6mm x 1.05mm |
About this product
The Beaver Wire Rope Nickle Plated Copper Ferrules 1.8mm x 3.6mm x 1.05mm are swage fittings used to form eyes and terminations in 1.6mm wire rope. This is the smallest end of the range, with a 1.8mm bore, a 3.6mm outside dimension and a 1.05mm web between the two holes. Overall length is 6mm, so the finished termination stays neat on light cable work.
Copper swages down cleanly under the right die, and the nickle plating gives the finished ferrule a bright, even look that holds up better than bare copper around moisture. Beaver manufactures these to DIN 3093. Match the ferrule to the rope diameter, use the correct tool and die set, and check the swage across its full length before the assembly takes any load.
Common questions
- what size wire rope do these ferrules fit
- This size suits 1.6mm wire rope. The bore measures 1.8mm, with a 3.6mm outside dimension and a 1.05mm web.
- what standard are Beaver copper ferrules made to
- Beaver manufactures these ferrules to DIN 3093.
- why nickle plated instead of plain copper ferrules
- The nickle plating gives a bright, consistent finish and adds a layer of protection over the copper, which helps when the termination sees moisture.
Full specifications
| Product Code | Size | a | b | c | L |
|---|---|---|---|---|---|
| 617416NP | 1.6mm | 1.8mm | 3.6mm | 1.05mm | 6mm |
| 617402NP | 2mm | 2.2mm | 4.4mm | 0.9mm | 7mm |
| 617402ANP | 2.5mm | 2.7mm | 5.4mm | 1.05mm | 9mm |
| 617403NP | 3mm | 3.3mm | 6.6mm | 1.25mm | 11mm |
| 617404NP | 4mm | 4.4mm | 8.8mm | 1.7mm | 14mm |
| 617405NP | 5mm | 5.5mm | 11mm | 2.1mm | 18mm |
| 617406NP | 6mm | 6.6mm | 13.2mm | 2.5mm | 21mm |
Questions about this equipment? Send us a message and we’ll check it against the job.