Beaver General Purpose Winch Hooks 1.5t
426315per Each
$3.74 inc GSTTrade $3.37, save $0.37Trade accounts save 10%. Apply with your ABN
| b | 44mm |
| e | 66mm |
| d1 | 18mm |
| g1 | 13mm |
| Weight | 0.17kg |
| Capacity | 1.5t |
About this product
The Beaver General Purpose Winch Hooks 1.5t is a galvanised terminal hook for the end of a winch line, suited to both wire rope and webbing. It carries a 1.5t capacity and a spring loaded snap that closes over the load so the hook stays put once it is on. At 0.17kg it is light enough to handle one-handed while you are working off a vehicle or a portable winch.
Dimensions are a 44mm width across the body and a 66mm height, with an 18mm d1 and a 13mm g1 opening, so it pairs neatly with smaller winch ropes and webbing straps. Construction is heavy duty high strength steel, and the galvanised finish helps it stand up to weather and site knocks. It is the only size offered in this Beaver range, so specify it where a 1.5t hook is the right fit.
Common questions
- what is the WLL of the beaver 1.5t winch hook
- It is rated at a 1.5t capacity. Keep the load within that figure and make sure the rest of your winch setup is rated to match.
- can you use this winch hook with webbing straps
- Yes, this hook suits both wire rope and webbing. The spring loaded snap closes over the attachment point for a quick, secure connection.
- is the beaver general purpose winch hook galvanised
- It is, with a galvanised finish over heavy duty high strength steel, which helps it handle outdoor and site conditions.
Full specifications
| Product Code | Capacity | d1 | b | e | g1 | Weight |
|---|---|---|---|---|---|---|
| 426315 | 1.5t | 18mm | 44mm | 66mm | 13mm | 0.17kg |
Questions about this equipment? Send us a message and we’ll check it against the job.