Beaver Chain Split Links 10mm x Hot Dipped Galvanised
420310per Each
$1.89 inc GSTTrade $1.70, save $0.19Trade accounts save 10%. Apply with your ABN
| Finish | Hot Dipped Galvanised |
| Weight | 0.12kg |
| Size (mm) | 10mm |
| Thickness | 10mm |
About this product
The Beaver Chain Split Links 10mm x Hot Dipped Galvanised is a split link for joining or repairing lengths of chain without pulling the whole run out of service. At 10mm thickness, it sits at the heavier end of the range and suits chain of matching size, where a thinner link would not fill the gap. Each link weighs 0.12kg.
Fitting is simple. Slot the link through the chain ends, then hammer it down or tack weld it to close it in place. The hot dipped galvanised finish gives it more protection against rust and corrosion than the electro galvanised version, which makes it the better pick for gear living outdoors or in wet conditions. Keep a few of the 10mm links on the truck and you can sort a broken chain on the spot.
Common questions
- how do you close a beaver split link
- Hammer the link down once it is fitted, or tack weld it to hold it closed in place.
- what size chain does a 10mm split link suit
- This link is 10mm thick, so it is matched to 10mm chain. Other sizes in the Beaver range cover different chain thicknesses.
- hot dipped vs electro galvanised split links
- Both finishes guard against rust and corrosion, but the hot dipped galvanised coating is the heavier of the two and the usual choice for gear left outdoors.
Full specifications
| Product Code | Size (mm) | Finish | Weight |
|---|---|---|---|
| 420103 | 3.5mm | Electro Galvanised | 0.0041kg |
| 420303 | 3.5mm | Hot Dipped Galvanised | 0.0041kg |
| 420105 | 5mm | Electro Galvanised | 0.0172kg |
| 420305 | 5mm | Hot Dipped Galvanised | 0.0172kg |
| 420106 | 6mm | Electro Galvanised | 0.03kg |
| 420306 | 6mm | Hot Dipped Galvanised | 0.03kg |
| 420108 | 8mm | Electro Galvanised | 0.069kg |
| 420308 | 8mm | Hot Dipped Galvanised | 0.069kg |
| 420110 | 10mm | Electro Galvanised | 0.12kg |
| 420310 | 10mm | Hot Dipped Galvanised | 0.12kg |
| 420113 | 13mm | Electro Galvanised | 0.23kg |
| 420313 | 13mm | Hot Dipped Galvanised | 0.23kg |
Questions about this equipment? Send us a message and we’ll check it against the job.