Beaver Chain Split Links 10mm x Electro Galvanised
420110per Each
$1.99 inc GSTTrade $1.79, save $0.20Trade accounts save 10%. Apply with your ABN
| Finish | Electro Galvanised |
| Weight | 0.12kg |
| Size (mm) | 10mm |
| Thickness | 10mm |
About this product
The Beaver Chain Split Links 10mm x Electro Galvanised is a simple connector for joining two lengths of chain or patching a damaged section without pulling the whole run out of service. The 10mm thickness suits the heavier end of the range, so it pairs with chain of matching size where a lighter link would not sit right. At 0.12kg, it is easy to carry a few in the ute or the toolbox.
Fitting is straightforward. Slip the link through, then hammer it down or tack weld it closed so it stays put under load. The electro galvanised finish adds a layer of protection against rust and corrosion, which helps when the chain spends its life outdoors or around damp. Worth checking closed links now and then to make sure nothing has worked loose.
Common questions
- what size chain does a 10mm split link suit
- This link is 10mm thick, so it is matched to 10mm chain. Sizing it to the chain keeps the joint sitting correctly.
- how do you close a chain split link
- Hammer it down or tack weld it so the link is shut in place. Either method closes the link once it has been fitted through the chain.
- electro galvanised or hot dip galvanised split links
- Beaver Chain Split Links come in both finishes. This one is electro galvanised, which adds protection against rust and corrosion.
Full specifications
| Product Code | Size (mm) | Finish | Weight |
|---|---|---|---|
| 420103 | 3.5mm | Electro Galvanised | 0.0041kg |
| 420303 | 3.5mm | Hot Dipped Galvanised | 0.0041kg |
| 420105 | 5mm | Electro Galvanised | 0.0172kg |
| 420305 | 5mm | Hot Dipped Galvanised | 0.0172kg |
| 420106 | 6mm | Electro Galvanised | 0.03kg |
| 420306 | 6mm | Hot Dipped Galvanised | 0.03kg |
| 420108 | 8mm | Electro Galvanised | 0.069kg |
| 420308 | 8mm | Hot Dipped Galvanised | 0.069kg |
| 420110 | 10mm | Electro Galvanised | 0.12kg |
| 420310 | 10mm | Hot Dipped Galvanised | 0.12kg |
| 420113 | 13mm | Electro Galvanised | 0.23kg |
| 420313 | 13mm | Hot Dipped Galvanised | 0.23kg |
Questions about this equipment? Send us a message and we’ll check it against the job.