
| Finish | Electro Galvanised |
| Weight | 0.069kg |
| Size (mm) | 8mm |
| Thickness | 8mm |
The Beaver Chain Split Links 8mm x Electro Galvanised is a simple connector for joining two lengths of chain or patching a damaged one. At 8mm thickness it suits mid-weight chain work, and the link weighs 0.069kg, so it adds next to nothing to the assembly. Slip it through the end links, then close it up.
Closing is done either by hammering the link down or running a tack weld over it, depending on how permanent you want the join. The electro galvanised finish gives it a layer of protection against rust and corrosion in general site conditions. If the chain is going to live outdoors long term, the hot dip galvanised version of the same link is worth a look instead.
| Product Code | Size (mm) | Finish | Weight |
|---|---|---|---|
| 420103 | 3.5mm | Electro Galvanised | 0.0041kg |
| 420303 | 3.5mm | Hot Dipped Galvanised | 0.0041kg |
| 420105 | 5mm | Electro Galvanised | 0.0172kg |
| 420305 | 5mm | Hot Dipped Galvanised | 0.0172kg |
| 420106 | 6mm | Electro Galvanised | 0.03kg |
| 420306 | 6mm | Hot Dipped Galvanised | 0.03kg |
| 420108 | 8mm | Electro Galvanised | 0.069kg |
| 420308 | 8mm | Hot Dipped Galvanised | 0.069kg |
| 420110 | 10mm | Electro Galvanised | 0.12kg |
| 420310 | 10mm | Hot Dipped Galvanised | 0.12kg |
| 420113 | 13mm | Electro Galvanised | 0.23kg |
| 420313 | 13mm | Hot Dipped Galvanised | 0.23kg |
Questions about this equipment? Send us a message and we’ll check it against the job.