
| UOM | Each |
| LC (kg) | 2300 |
| Hook Type | Regular Grab Hooks |
| Chain Size | 6mm |
| Weight (kg) | 5.28 |
| Chain Length | 6m |
| Chain Size (mm) | 6 |
| Chain Length (m) | 6 |
| Chain Part Number | 145006 |
| Grab Hook Part Number | 354006 |
The Beaver Grade 70 Transport Load Chain Kit With Grab Hooks on Each End 6mm x 6m is a ready to go tie down assembly for strapping loads onto trucks, trailers and floats. The 6mm chain carries a lashing capacity of 2300kg, and at 6m it suits mid size loads where a shorter run leaves you short and a longer one just gathers up. Regular grab hooks are fitted at both ends, so you can shorten the leg and hook back onto the chain without extra fittings.
Chain and fittings are made from heat treated carbon steel in accordance with AS/NZS 4344, with everything stamped Grade 70 along with the lashing capacity and chain size. The zinc di-chromate gold finish makes the kit easy to pick out on a deck from a distance, which helps when you are checking a load at a glance. The whole assembly weighs 5.28kg, so it is easy enough to sling over a load on your own.
| Product Code | Chain Size (mm) | Chain Length (m) | Hook Type | Chain Part Number | Grab Hook Part Number | LC (kg) | Weight (kg) | UOM |
|---|---|---|---|---|---|---|---|---|
| 400603 | 6 | 6 | Regular Grab Hooks | 145006 | 354006 | 2300 | 5.28 | Each |
| 409003 | 7.1 | 6 | Regular Grab Hooks | 145007 | 354008 | 3000 | 7.3 | Each |
| 401003 | 8 | 6 | Regular Grab Hooks | 145008 | 354008 | 3800 | 9.34 | Each |
| 406003 | 10 | 6 | Regular Grab Hooks | 145010 | 354010 | 6000 | 14.32 | Each |
| 400903 | 6 | 9 | Winged Grab Hooks | 145006 | 354006 | 2300 | 7.68 | Each |
| 411003 | 7.1 | 9 | Winged Grab Hooks | 145007 | 354008 | 3000 | 10.57 | Each |
| 145128 | 8 | 9 | Winged Grab Hooks | 145008 | 354008 | 3800 | 13.63 | Each |
| 408003 | 10 | 9 | Winged Grab Hooks | 145010 | 354010 | 6000 | 20.98 | Each |
Questions about this equipment? Send us a message and we’ll check it against the job.