
| W | 41 |
| D1 | 19 |
| D2 | 12.70 |
| D3 | 11 |
| D4 | 28 |
| H1 | 22 |
| H2 | 42.5 |
| WLL | 0.4t |
| Finish | Self Colour |
| Weight | 0.146kg |
| Thread Size | 1/2" |
| Size (inches) | 1/2" |
| Transverse Load Tonne | 0.1 |
The Beaver Lifting Collared Eyebolt with B.S.W. Thread in 1/2" is a threaded lifting point for picking up machinery, dies and fabricated parts that have a tapped hole ready to take it. This size carries a working load limit of 0.4t vertically, with 0.1t allowed on a transverse pull once the collar is seated hard against the face of the load. It complies to AS 2317.
At 0.146kg with a 41mm eye width, a 28mm collar and an overall height of 42.5mm, it sits in the middle of the BSW range and suits smaller, lighter lifts than the bigger threads. The finish is self colour, so keep it dry, oiled and out of the weather between jobs. Check the thread, eye and collar face for wear or damage before every use.
| Product Code | Size (inches) | WLL | Transverse Load Tonne | Finish | Weight |
|---|---|---|---|---|---|
| 358010 | 3/8" | 0.25t | 0.06 | Self Colour | 0.055kg |
| 358013 | 1/2" | 0.4t | 0.1 | Self Colour | 0.146kg |
| 358016 | 5/8" | 0.8t | 0.2 | Self Colour | 0.3kg |
| 358019 | 3/4" | 1.6t | 0.4 | Self Colour | 0.525kg |
| 358022 | 7/8" | 2t | 0.5 | Self Colour | 0.9kg |
| 358025 | 1" | 2.5t | 0.62 | Self Colour | 1.06kg |
| 358028 | 1-1/8" | 3.5t | 0.87 | Self Colour | 1.6kg |
| 358032 | 1-1/4" | 5t | 1.25 | Self Colour | 2.6kg |
| Product Code | Size (inches) | W | H1 | H2 | D1 | D2 | D3 | D4 |
|---|---|---|---|---|---|---|---|---|
| 358010 | 3/8" | 32 | 17 | 35 | 14 | 9.53 | 9 | 21 |
| 358013 | 1/2" | 41 | 22 | 42.5 | 19 | 12.70 | 11 | 28 |
| 358016 | 5/8" | 52 | 28 | 58 | 24 | 15.88 | 14 | 36 |
| 358019 | 3/4" | 62 | 33 | 69 | 28 | 19.05 | 17 | 43 |
| 358022 | 7/8" | 73 | 39 | 80.5 | 33 | 22.23 | 20 | 50 |
| 358025 | 1" | 82 | 44 | 92 | 38 | 25.40 | 22 | 57 |
| 358028 | 1-1/8" | 92 | 50 | 103 | 42 | 28.58 | 25 | 64 |
| 358032 | 1-1/4" | 104 | 55 | 116 | 47 | 31.75 | 28 | 71 |
Questions about this equipment? Send us a message and we’ll check it against the job.