
| LC | 6000kg |
| UOM | Each |
| b mm | 66.5 |
| d mm | 12.5 |
| e mm | 60.5 |
| f mm | 12.4 |
| g mm | 13.5 |
| w mm | 39 |
| Weight | 0.5kg |
| Chain Size | 10mm |
| Chain size mm | 10 |
The Beaver G70 Gold Clevis Grab Hooks with Wings 10mm is a grade 70 lashing chain fitting used to shorten or terminate a chain leg when tying down a load. It suits 10mm chain and carries a lashing capacity of 6000kg, the heavier end of the range for truck and trailer restraint work. The wings sit against the chain links to keep the hook seated square under tension, so it does not roll or foul when the tensioner is wound up.
Built as a hi tensile fitting with a zinc di-chromate gold finish for corrosion resistance and easy identification in a kit. Key dimensions are 66.5mm b, 12.5mm d, 60.5mm e, 12.4mm f, 13.5mm g and 39mm w, with a weight of 0.5kg. It complies to AZ/NZS 4344. Match the hook to your chain size, check the throat and pin for wear or spread before each trip.
| Product Code | Chain size mm | f mm | d mm | e mm | b mm | g mm | w mm | LC | Weight | UOM |
|---|---|---|---|---|---|---|---|---|---|---|
| 354006 | 6 | 9.2 | 8.5 | 46.4 | 49 | 9.2 | 22 | 2300kg | 0.24kg | Each |
| 354008 | 7-8 | 10.4 | 10.5 | 49 | 57 | 10.5 | 28 | 3800kg | 0.38kg | Each |
| 354010 | 10 | 12.4 | 12.5 | 60.5 | 66.5 | 13.5 | 39 | 6000kg | 0.5kg | Each |
| 354013 | 13 | 19.5 | 16.5 | 84 | 88 | 18 | 39 | 9000kg | 0.68kg | Each |
Questions about this equipment? Send us a message and we’ll check it against the job.