Beaver Single Hydraulic Scissor Lift Table 300kg
342630per Each
$1269.07 inc GSTTrade $1142.16, save $126.91Trade accounts save 10%. Apply with your ABN
| Capacity | 300kg |
About this product
The Beaver Single Hydraulic Scissor Lift Table 300kg is a wheeled work platform that lifts and moves loads at the height you want to work at, not down at boot level. The 300kg capacity sits in the middle of the range, above the 150kg unit and below the 500kg, so it suits workshop and store jobs where the loads are heavier than one bloke should be bending over to pick up. A foot pump does the lifting and a quick release brings it back down.
Underneath it runs a heavy duty scissor mechanism with hydraulic cylinders, bearings and components built for daily use. The push handle is chrome plated, and the frame is powder coated safety yellow so it stays visible on a busy floor and takes a few knocks. Polyurethane castors roll easily on hard surfaces, with hand locking devices on the rear wheels to hold it still while you load or unload. Handy around loading docks, assembly lines, hospitals and offices.
Common questions
- how much weight can the beaver 300kg scissor lift table hold
- It is rated to a 300kg capacity. Beaver also makes the same style table in 150kg and 500kg capacities.
- how do you raise and lower a beaver hydraulic lift table
- You pump it up with the foot pump to set the working height, then use the quick release system to lower the platform.
- does the beaver scissor lift table have brakes
- Yes. It rolls on polyurethane castors, and the rear wheels have hand locking devices to hold it in place while you work.
Full specifications
| Product Code | 342615 | 342630 | 342650 |
|---|---|---|---|
| Capacity | 150kg | 300kg | 500kg |
| Min. Table Height (A) | 220mm | 295mm | 295mm |
| Max. Table Height (B) | 720mm | 885mm | 890mm |
| Table Length (L) | 700mm | 855mm | 855mm |
| Table Width (W) | 450mm | 500mm | 500mm |
| Table Thickness (T) | 36mm | 50mm | 50mm |
| Height of Handle from Ground (H) | 935mm | 985mm | 985mm |
| Castor Wheel | 100 x 25 | 125 x 40 | 125 x 40 |
| Foot Pedal Cycles to Max. Height | <=28 | <=39 | <=27 |
| Weight | 49kg | 77kg | 81kg |
Questions about this equipment? Send us a message and we’ll check it against the job.