Beaver Wire Rope Thimbles Hot Dipped Galvanised 11mm

About this product

The Beaver Wire Rope Thimbles Hot Dipped Galvanised 11mm sits inside a rope eye to stop the wire crushing or chafing where the load pulls hardest. This size is cut for 11mm wire rope, with a 12.7mm groove, a 29mm D dimension and an overall height of 41mm. Get the thimble matched to the rope diameter and the eye holds its shape under load instead of deforming.

Hot dip galvanising gives the steel a coating that handles outdoor yards, wet weather and salt air better than a bare or bright finish. Handy for slings, guy ropes and any termination that gets repeated loading. The thimble complies to AS1138. Check the groove is seated properly before swaging or clamping, and replace any thimble that has flattened, cracked or worn thin at the throat.