
| A | 34mm |
| B | 33mm |
| C | 37mm |
| D | 14mm |
| H | 68mm |
| W | 61mm |
| Finish | Electro Galvanised |
| Pail QTY | 5 |
| Wire Diameter | 22mm |
Beaver Commercial Galvanised Wire Rope Grips in the 22mm size are used to form a secure eye or dead-end termination on 22mm wire rope. This is the heavy end of the range, with a 68mm saddle height and 61mm width, a 34mm A dimension, 33mm B, 37mm C and 14mm D across the U-bolt legs. Bigger rope, bigger hardware, so check your rope diameter before you order.
The electro galvanised finish gives the saddle and U-bolt a level of corrosion protection for general site and yard work. Note that these grips are not suitable for lifting, so keep them to guy wires, fencing, barriers and similar static jobs. Fit the saddle on the live side of the rope, space the grips along the tail, and nip the nuts up evenly. Give them a look over now and then and re-tension if the rope has bedded in.
| Product code | Wire Diameter | W | C | H | A | D | B | Finish | Pail QTY |
|---|---|---|---|---|---|---|---|---|---|
| 301203P | 3mm | 19.5mm | 9mm | 17mm | 9.5mm | 4mm | 10.5mm | Electro Galvanised | 100 |
| 301205P | 5mm | 22.5mm | 11mm | 19mm | 10mm | 5mm | 11mm | Electro Galvanised | 100 |
| 301206P | 6mm | 24mm | 13mm | 23mm | 10.5mm | 5mm | 12mm | Electro Galvanised | 50 |
| 301208P | 8mm | 28mm | 15mm | 28mm | 14mm | 6mm | 14mm | Electro Galvanised | 80 |
| 301210P | 10mm | 33mm | 18.5mm | 34mm | 16mm | 8mm | 18mm | Electro Galvanised | 50 |
| 301213P | 13mm | 41mm | 23mm | 45mm | 21mm | 10mm | 22mm | Electro Galvanised | 20 |
| 301216P | 16mm | 49mm | 29.5mm | 52mm | 25mm | 12mm | 25mm | Electro Galvanised | 15 |
| 301220P | 20mm | 52mm | 32mm | 62mm | 30mm | 12mm | 28mm | Electro Galvanised | 10 |
| 301222P | 22mm | 61mm | 37mm | 68mm | 34mm | 14mm | 33mm | Electro Galvanised | 5 |
| 301225P | 25mm | 70mm | 41mm | 78mm | 39mm | 14mm | 34mm | Electro Galvanised | 5 |
Questions about this equipment? Send us a message and we’ll check it against the job.