what is the max plate thickness for the beaver 0.75t plate clamp

It takes plate from 0 to 15mm in the jaw. Anything thicker needs a larger size in the range.

can you lift a steel plate sideways with this clamp

Yes, the universal hinged lifting eye lets you take the load from any direction, so horizontal and angled lifts are covered as well as vertical.

what steel hardness can the beaver UC plate clamp be used on

It is only to be used on steel with a hardness of 37RC (345 Brinell). Harder material can damage the tongue and pressure plate and cost you grip.

Beaver UC Universal Plate Clamps 0.75t

Name: Beaver UC Universal Plate Clamps 0.75t
Brand: Beaver
SKU: 261075
Price: 145.08 AUD
Availability: InStock

261075per Each

Working Load Limit

$145.08 inc GSTTrade $130.57, save $14.51Trade accounts save 10%. Apply with your ABN

A	0-15mm
B	109mm
C	50mm
D	200mm
E	30mm
WLL	0.75t
Net Weight	2kg
Working Load Limit	0.75t

About this product

The Beaver UC Universal Plate Clamp 0.75t is a steel plate lifting clamp with a hinged lifting eye, so you can pick up a plate from any direction without fighting the angle. This is the smallest working range in the series, with a 0.75t working load limit and a jaw that takes plate from 0 to 15mm. Handy for thinner sheet and lighter panels where a bigger clamp is more weight than you need.

All steel construction with a safety lock, a hardened pressure plate and tongue for grip that holds through the lift. Body dimensions run 109mm, 50mm, 200mm and 30mm across points B to E, and the clamp weighs 2kg, so it is easy to carry and set by hand. Only use it on steel with a hardness up to 37RC (345 Brinell). Complies to AS4991.

Common questions

what is the max plate thickness for the beaver 0.75t plate clamp: It takes plate from 0 to 15mm in the jaw. Anything thicker needs a larger size in the range.
can you lift a steel plate sideways with this clamp: Yes, the universal hinged lifting eye lets you take the load from any direction, so horizontal and angled lifts are covered as well as vertical.
what steel hardness can the beaver UC plate clamp be used on: It is only to be used on steel with a hardness of 37RC (345 Brinell). Harder material can damage the tongue and pressure plate and cost you grip.

Full specifications

Product Code	WLL	A	B	C	D	E	Net Weight
261050	0.5t	0-15mm	108mm	48mm	195mm	30mm	2kg
261075	0.75t	0-15mm	109mm	50mm	200mm	30mm	2kg
261100	1t	0-20mm	145mm	72mm	265mm	45mm	5kg
261200	2t	0-25mm	175mm	75mm	368mm	65mm	7.5kg
268300	3t	0-28mm	210mm	98mm	415mm	71mm	15kg
268500	5t	0-32mm	245mm	100mm	410mm	71mm	18kg

Questions about this equipment? Send us a message and we’ll check it against the job.