Beaver Screw Pin Anchor Bow Shackle 4.7t

About this product

The Beaver Screw Pin Anchor Bow Shackle 4.7t is a rated bow shackle for non-permanent lifting and towing connections, where you want to pin up, do the lift and pull it apart again. This size runs a 19mm body with a 22mm screw pin, giving a 4.7t working load limit at just 1.07kg in the hand. The wide bow, 51mm across with 32mm inside width and 72mm inside length, takes multiple sling legs or a thicker eye without crowding the pin.

Grade S steel gives the strength to weight ratio riggers want on crane work, recovery gear and 4WD setups. Hot dip galvanised finish handles weather and site exposure. Each shackle is marked with the WLL, quality grade, size and batch ID or date of manufacture, proof tested to the Australian Standard and complies to AS 2741. Test certificates are available on request. Check the pin threads freely and the boss is undamaged before every lift.