Beaver G80 Black Calibrated Load Chain 10mm x 30mm
149010per Each
$60.19 inc GSTTrade $54.17, save $6.02Trade accounts save 10%. Apply with your ABN
| F | 34mm |
| R | 30mm |
| S | 10mm |
| Finish | Black |
| Diameter | 10mm |
| Inside Length | 30mm |
About this product
The Beaver G80 Black Calibrated Load Chain 10mm x 30mm is replacement load chain calibrated to run through Beaver 3S chain blocks and lever blocks. Being calibrated, the links are held to consistent dimensions so they seat properly in the load pockets and feed through the gearing without snatching. This size runs 10mm chain diameter with a 30mm inside link length and a 34mm outside width, in a Grade 80 black finish.
Pick the size that matches the block you are servicing, since a block set up for 10mm chain will not take a different diameter. Worth noting this is load chain for blocks, not sling chain, so it is not to be used for lifting on its own. Keep it clean and lightly oiled, and check links for wear, stretch or gouging before it goes back into service.
Common questions
- what is beaver g80 calibrated load chain used for
- It is replacement load chain for Beaver 3S chain blocks and lever blocks. It is not to be used for lifting as a chain on its own.
- what size is the 10mm x 30mm beaver load chain
- The chain diameter is 10mm with a 30mm inside link length and 34mm across the outside of the link.
- what finish does beaver g80 load chain have
- It is Grade 80 chain in a black finish.
Full specifications
| Product code | Diameter | Inside Length | S | R | F | Finish |
|---|---|---|---|---|---|---|
| 149005 | 5mm | 15mm | 5mm | 15mm | 17mm | Black |
| 149006 | 6mm | 18mm | 6mm | 18mm | 20.4mm | Black |
| 149008 | 8mm | 24mm | 8mm | 24mm | 27.2mm | Black |
| 149010 | 10mm | 30mm | 10mm | 30mm | 34mm | Black |
Questions about this equipment? Send us a message and we’ll check it against the job.