Beaver G80 Black Calibrated Load Chain 8mm x 24mm
149008per Each
$28.53 inc GSTTrade $25.68, save $2.85Trade accounts save 10%. Apply with your ABN
| F | 27.2mm |
| R | 24mm |
| S | 8mm |
| Finish | Black |
| Diameter | 8mm |
| Inside Length | 24mm |
About this product
Beaver G80 Black Calibrated Load Chain 8mm x 24mm is replacement load chain for Beaver 3S chain blocks and lever blocks. Calibrated means the link pitch is held tight so the chain feeds cleanly through the load wheel and pockets without skipping. This size runs 8mm material with a 24mm inside length and a 27.2mm outside width, so it needs to be matched to a block built for those dimensions.
The finish is black, and it is Grade 80 chain. Worth being clear on one point: this is load chain for hoist bodies, not chain for making up slings or lifting directly. Pick the size that matches your block, check the old chain for wear and stretch before you swap it over, and keep the end fittings and stops in the right order when you reeve it.
Common questions
- what is beaver g80 calibrated load chain used for
- It is the load chain that runs through Beaver 3S chain blocks and lever blocks. It is not to be used for lifting on its own.
- will 8mm x 24mm chain fit my beaver block
- It suits Beaver 3S blocks built for 8mm chain with a 24mm inside link length. Check the size stamped on your block or measure the chain you are replacing.
- what finish is the beaver g80 load chain
- Black finish, Grade 80 chain in 8mm diameter with a 27.2mm outside width.
Full specifications
| Product code | Diameter | Inside Length | S | R | F | Finish |
|---|---|---|---|---|---|---|
| 149005 | 5mm | 15mm | 5mm | 15mm | 17mm | Black |
| 149006 | 6mm | 18mm | 6mm | 18mm | 20.4mm | Black |
| 149008 | 8mm | 24mm | 8mm | 24mm | 27.2mm | Black |
| 149010 | 10mm | 30mm | 10mm | 30mm | 34mm | Black |
Questions about this equipment? Send us a message and we’ll check it against the job.