Beaver G80 Black Calibrated Load Chain 6mm x 18mm
149006per Each
$10.49 inc GSTTrade $9.44, save $1.05Trade accounts save 10%. Apply with your ABN
| F | 20.4mm |
| R | 18mm |
| S | 6mm |
| Finish | Black |
| Diameter | 6mm |
| Inside Length | 18mm |
About this product
The Beaver G80 Black Calibrated Load Chain 6mm x 18mm is calibrated replacement chain for Beaver 3S chain blocks and lever blocks. Calibrated means the link pitch is held to tight tolerance so it feeds through the load wheel and pockets cleanly without jumping or binding. This is the smallest size in the range, with 6mm material and an 18mm inside link length, suited to the lighter Beaver units.
Grade 80 steel with a black finish, an outside width of 20.4mm across the link. Worth checking your block's data plate before ordering, because a chain that is a size off will not track properly through the pocket wheel. One important point, this chain is not to be used for lifting. It is there to keep your existing blocks running as they were built to run.
Common questions
- can you use Beaver G80 calibrated load chain for lifting
- No. This calibrated load chain is not to be used for lifting. It is made as load chain for Beaver 3S chain and lever blocks.
- what blocks does Beaver 6mm x 18mm calibrated chain fit
- It is designed to suit Beaver 3S chain blocks and lever blocks. Check the size stamped on your unit's data plate, as the range comes in four sizes.
- what grade and finish is this Beaver load chain
- It is Grade 80 chain with a black finish. The material is 6mm, with an 18mm inside link length and 20.4mm across the link.
Full specifications
| Product code | Diameter | Inside Length | S | R | F | Finish |
|---|---|---|---|---|---|---|
| 149005 | 5mm | 15mm | 5mm | 15mm | 17mm | Black |
| 149006 | 6mm | 18mm | 6mm | 18mm | 20.4mm | Black |
| 149008 | 8mm | 24mm | 8mm | 24mm | 27.2mm | Black |
| 149010 | 10mm | 30mm | 10mm | 30mm | 34mm | Black |
Questions about this equipment? Send us a message and we’ll check it against the job.