Beaver G80 Black Calibrated Load Chain 5mm x 15mm
149005per Each
$9.27 inc GSTTrade $8.34, save $0.93Trade accounts save 10%. Apply with your ABN
| F | 17mm |
| R | 15mm |
| S | 5mm |
| Finish | Black |
| Diameter | 5mm |
| Inside Length | 15mm |
About this product
The Beaver G80 Black Calibrated Load Chain 5mm x 15mm is calibrated replacement chain for Beaver 3S chain and lever blocks. Being the smallest link in the range, the 5mm diameter and 15mm inside length suit the lighter blocks where the pockets and guides are cut for a finer pitch. Outside width sits at 17mm. Calibration is the whole point here, the links have to run through the load wheel cleanly without skipping or jamming.
Grade 80 steel with a black finish. Worth noting, this chain is not to be used for lifting, it is there to keep a block running as the maker intended. If you are ordering replacement chain, check the diameter and inside length stamped or measured on your existing chain first, because the other sizes in the range will not track correctly through a block built for 5mm.
Common questions
- can you use Beaver G80 calibrated load chain for lifting
- No. This chain is not to be used for lifting, it is calibrated chain for Beaver 3S chain and lever blocks.
- what blocks does 5mm x 15mm calibrated chain fit
- It is made to suit Beaver 3S chain and lever blocks built for 5mm chain with a 15mm inside link length.
- what grade and finish is this Beaver load chain
- It is Grade 80 chain with a black finish, 5mm diameter and 17mm across the outside of the link.
Full specifications
| Product code | Diameter | Inside Length | S | R | F | Finish |
|---|---|---|---|---|---|---|
| 149005 | 5mm | 15mm | 5mm | 15mm | 17mm | Black |
| 149006 | 6mm | 18mm | 6mm | 18mm | 20.4mm | Black |
| 149008 | 8mm | 24mm | 8mm | 24mm | 27.2mm | Black |
| 149010 | 10mm | 30mm | 10mm | 30mm | 34mm | Black |
Questions about this equipment? Send us a message and we’ll check it against the job.