
| F | 70mm |
| R | 72mm |
| S | 19.8mm |
| Finish | Galvanised |
| m/100kg | 12m/100kg |
| Nominal Size | 20mm |
The Beaver Galvanised Proof Coil Chain - Regular Link 20mm is a general purpose commercial chain for restraint, fencing, barriers and other non-lifting jobs around site. At 20mm nominal size it is the heavy end of the regular link range, with a 19.8mm material section, 70mm link length and 72mm outside width. Weight works out at roughly 12m per 100kg, so plan your handling accordingly.
It is made from low carbon steel and finished hot dipped galvanised, which holds up better than bare steel in wet and outdoor conditions. This chain is non-rated and must not be used for lifting. The proof coil name refers to the consistent link count through a length, not a load rating. If you need to pick or sling a load, go to a properly rated grade lifting chain instead.
| Product code | Nominal Size | S | R | F | Finish | m/100kg |
|---|---|---|---|---|---|---|
| 100303 | 3mm | 3mm | 16.6mm | 13.1mm | Galvanised | 534m/100kg |
| 100304 | 4mm | 3.9mm | 20mm | 15.6mm | Galvanised | 321m/100kg |
| 100305 | 5mm | 4.7mm | 25mm | 18mm | Galvanised | 230m/100kg |
| 100306 | 6mm | 6mm | 27mm | 24mm | Galvanised | 132m/100kg |
| 100308 | 8mm | 7.6mm | 35.8mm | 29.2mm | Galvanised | 86m/100kg |
| 100310 | 10mm | 9.5mm | 43.4mm | 34mm | Galvanised | 56m/100kg |
| 100313 | 13mm | 13mm | 50mm | 46mm | Galvanised | 28m/100kg |
| 100316 | 16mm | 15.8mm | 60mm | 56mm | Galvanised | 19m/100kg |
| 100320 | 20mm | 19.8mm | 72mm | 70mm | Galvanised | 12m/100kg |
| 100324 | 24mm | 25mm | 90mm | 85mm | Galvanised | 7.8m/100kg |
Questions about this equipment? Send us a message and we’ll check it against the job.