Beaver Galvanised Proof Coil Chain - Customised 6mm x 3.1m
100304-VTC-ACper Each
$11.38 inc GSTTrade $10.24, save $1.14Trade accounts save 10%. Apply with your ABN
| Finish | Hot Dipped Galvanised |
| Length | 3.1m |
| Chain Length | 3.1m |
| Nominal Size | 6mm |
About this product
The Beaver Galvanised Proof Coil Chain - Customised 6mm x 3.1m is a non-rated commercial chain cut to a set length for general purpose restraint and hanging jobs. It is made from low carbon steel with a hot dipped galvanised finish, so it handles outdoor and damp conditions better than a bare steel chain. At 6mm nominal size, this is the lighter of the two sizes in the range, easier to handle and thread through brackets where a heavier link would be overkill.
The 3.1m length suits repeat jobs where the same run gets used again and again, things like underground vent tube chain or conveyor hanging chain. Proof coil refers to the consistent link count along the length, which keeps fit-up predictable. One thing to be clear on, this chain carries no working load limit and must not be used for lifting. Keep it for securing, suspending and general site duties.
Common questions
- can you lift with Beaver proof coil chain?
- No. It is a non-rated chain for general purpose use only and is not suitable for lifting.
- what is Beaver galvanised proof coil chain made of?
- Low carbon steel with a hot dipped galvanised finish.
- what length and size is this proof coil chain?
- This variant is 6mm nominal size in a 3.1m length, the smaller of the two sizes in the customised range.
Full specifications
| Product code | Nominal Size | Finish | Length |
|---|---|---|---|
| 100304-VTC-AC | 4mm | Hot Dipped Galvanised | 3.1m |
| 100206-2.5 | 6mm | Electro Galvanised | 2.5m |
| 100206-1.2 | 6mm | Electro Galvanised | 1.2m |
| 130308-1.5 | 8mm | Electro Galvanised | 1.5m |
Questions about this equipment? Send us a message and we’ll check it against the job.